WIKA 70-8xx - Manual (Page 9)

9
11472988.02 04/2013 GB/D/F/E
WIKA operating instructions expansion thermometer, model 70
GB
In addition to the standard version with 1 or 2 adjustable contacts, further combinations
are available, such as:
„ 1 or 2 fixed micro switches
„ 1 fixed and 1 adjustable micro switch
The switch points of the fixed micro switches are marked on the product label.
4.2 Scope of delivery
Cross-check scope of delivery with delivery note.
5. Transport, packaging and storage
5.1 Transport
Check the instrument for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in
installation site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage:
„
Storage temperature: -20 ... +60 °C (DIN EN 13190)
„ Humidity: 35 ... 85 % relative humidity (no condensation)
Avoid exposure to the following factors:
„
Direct sunlight or proximity to hot objects
„ Mechanical vibration, mechanical shock (putting it down hard)
„ Soot, vapour, dust and corrosive gases
„ Potentially explosive environments, flammable atmospheres
Store the instrument in its original packaging in a location that fulfils the conditions
listed above. If the original packaging is not available, pack and store the instrument as
described below:
1. Place the instrument along with shock-absorbent material in the packaging.
2. If stored for a prolonged period of time (more than 30 days), place a bag containing a
desiccant inside the packaging.
4. Design, function / 5. Transport, packaging, storage