RADWAG WLY Scales - Manual (Page 206)

206
40.2. Formatting variables
Users can format numeric, text and date variables intended for displaying
or printing out.
Different format commands:
• Justification to the left,
• Justification to the right,
• Setting the number of characters for printout / display,
• Declaration of the number of digital places for numeric variables,
• Date&Time formatting,
• Formatting numeric variables for EAN13 codes,
• Formatting numeric variables and dates for EAN128/GS1-128 codes.
Format characters:
Character Description Example
,
Separates veriables from
format strings
{7,10}
– Net mass in adjustment unit situated
in 10-character string justified to the right.
-
Minus sign or justification to the
left
{7,-10}
- Net mass in adjustment unit
situated in 10-character string justified to the
left
:
Precides formatting or
sepatates hours, minutes and
seconds
{7:0.000}
- Net mass in adjustment unit
always with three decimal places ;
{3:hh:mm:ss}
– Present time in the format :
hours : minutes : seconds
.
The first dot in the format string
determines the location of the
decimal separator in the
formatted value; any additional
dot characters are ignored.
{55:0.00}
– Unit price always with two
decimal places;
{17:0.0000}
– Average value form weighings
with four decimal places;
F
The number is converted to a
string of the form "-ddd.ddd…"
where each 'd' indicates a digit
(0-9). The string starts with a
minus sign if the number is
negative.
{7:F2}
- Net mass in adjustment unit always
with two decimal places.
{7,9:F2}
- Net mass in adjustment unit
always with two decimal places in 9-
character string justified to the right.
V
Formatting mass and
derivatives for EAN13 codes
{7:V6.3}
- Net mass for EAN13 (6-character
code) with three decimal characters
T
Formatowanie masy i wielkości
pochodnych do masy w kodzie
EAN128
{7:T6.3}
– Net mass for EAN128/GS1-128
with two decimal places.