RADWAG WLY Scales - Manual (Page 56)

56
Procedure:
• Enter submenu <
Barcode Scanner>
according to ch. 16.3 of this
manual,
• After entering parameter <
Test>
window <Test> is opened
with an ASCII text box and HEX (hexadecimal) field,
• After scanning the code is entered to the ASCII field and HEX filed
and at the bottom of the window a test result is displayed.
When:
• <Prefix> and <Suffix> declared in settings are the same as
<Prefix>
and <Suffix> in the read code then the test result is
<Positive>
,
• <Prefix> and <Suffix> declared in settings are not the same as
<Prefix>
and <Suffix> in the read code then the test result is
<Negative>
.
16.4. Transponder card reader
Selecting operator (logging in) can be done in two ways:
• Typing a password on a keyboard,
• Approaching a transponder card to the reader.
The card needs to be registerd first.
Notice:
In case of problems with reading transponder cards check the submenu
< Communication> and set appropriate baud rate (default 9600b/s).
16.4.1. Com port for transponder card readers
Procedure:
• Enter group of parameters <
Devices>
according to ch. 16
of this manula, select „ Transponder cards reader /
Port”
and set appropriate option.