RADWAG WLY Scales - Manual (Page 43)

43
Procedure:
• Enter <
Weighing>
according to ch. 14 of the manual, select
< Autozero>
and then set an appropriate value.
Accessible settings:
- Autozero off
- Autozero on
14.4. Minimum weight for different functions (LO)
Parameter <LO THRESHOLD> is associated with automatic weighing.
Next weighing will not be saved until the indication goes under the
THRESHOLD LO
(net).
Procedure:
• After entering <
Threshold Lo>
according to ch. 14 of this manual
a keyboard is displayed,
• Inscribe LO and confirm by pressing .
14.5. Last digit
The last digit option <
Last digit>
is to switch off the last digit of
measured mass indication – the measurement is carried out with decreased
accuracy.
Procedure:
• Enter group of parameters <
Weighing>
in accordance with ch.
14 of this user manual, select parameter <
Last digit>
and set
its desired value.