RADWAG WPW 60/H5/K Multifunctional Scales - Manual (Page 102)

24.5.1. Starting weighing in per cents
• Selection
of DEVIATIONS is confirmed by displaying “%” pictogram
in the upper right corner of the display.
24.5.2. Weighing a standard mass
Procedure:
• Enter
DEVIATIONS and then:
• Put a load to be a standard mass on the weight pan,
• After the equilibrium is reached (
) press ,
• You will see the indication of 100,00%,
• From this moment all results will be displayed in percents:
Return to weighing:
See 11.3.
- 102 -