Address setting, Commands operating of communication protocol – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 40
Advertising
Caution:
The procedure of designing non-standard printouts is described
in chapter 17.6 of this manual.
Return to weighing:
See 11.3.
15.1.3. Address setting
Procedure:
• Enter
< P3.1 COMPUTER > according to 11.2. and then:
• Inscribe a value (0 to 254) and press
.
Return to weighing:
See 11.3.
15.1.4. Commands operating of communication protocol
User in parameter <P3.1.4 BASIC TRS.> has possibility to set
communication protocol designed to communicate between
RADWAG scale and external device.
- 40 -
Advertising
This manual is related to the following products:
- WPW 60/H4/K Multifunctional Scales WPW 60/H3/K Multifunctional Scales WPW 60/C2/K Multifunctional Scales WPW 6/H2/K Multifunctional Scales WPW 6/F1/K Multifunctional Scales WPW 300/H6/K Multifunctional Scales WPW 300/H5/K Multifunctional Scales WPW 300/C3/K Multifunctional Scales WPW 300/C2/K Multifunctional Scales WPW 30/H3/K Multifunctional Scales WPW 30/F1/K Multifunctional Scales WPW 30/C2/K Multifunctional Scales WPW 3/H1/K Multifunctional Scales WPW 150/H6/K Multifunctional Scales WPW 150/H5/K Multifunctional Scales WPW 150/H4/K Multifunctional Scales WPW 150/H3/K Multifunctional Scales WPW 150/C3/K Multifunctional Scales WPW 150/C2/K Multifunctional Scales WPW 15/H3/K Multifunctional Scales WPW 15/H2/K Multifunctional Scales WPW 15/F1/K Multifunctional Scales