RADWAG WPW 60/H5/K Multifunctional Scales - Manual (Page 82)

Procedure:
• To declare a number of input ascribed to the button enter
<P8.1 EXTERNAL BUTTONS> and then,
• Press
, you will see <P8.1.1 TARE B.>,
• Press
:
• Confirm your selection with
,
• Using go to the next parameter.
Caution:
You can ascribe all your buttons accordingly. Remember that the
standard solution has only 3 inputs.
Return to weighing:
See 11.3.
20.2. Configuration of outputs
Users can configure outputs according to their needs.
You can declare outputs:
MIN Mass below the Min threshold
OK Mass between Min and Max threshold
MAX Mass over the Max threshold
STABLE Stable result over the LO threshold
THRESH 1 Threshold of passing from dosing to precise
dosing in dosing mode
THRESH 2 Completing dosing process
CHUTE Chute control
- 82 -