Enabling work modes, Nabling work modes – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 103
Advertising
24.5.1. Enabling work modes
• COUNTING PCS procedure is active when
pictogram
is displayed.
24.5.2. Setting standard mass by inscribing the mass
of a single piece
Procedure:
• Enter
COUNTING PCS and then:
Press
to initialise COUNTING PCS. with automatic setting
of standard mass.
Notice:
The mass of a single piece cannot be lower than 0.1d and greater than
the full scale.
- 103 -
Advertising
This manual is related to the following products:
- WPW 60/H4/K Multifunctional Scales WPW 60/H3/K Multifunctional Scales WPW 60/C2/K Multifunctional Scales WPW 6/H2/K Multifunctional Scales WPW 6/F1/K Multifunctional Scales WPW 300/H6/K Multifunctional Scales WPW 300/H5/K Multifunctional Scales WPW 300/C3/K Multifunctional Scales WPW 300/C2/K Multifunctional Scales WPW 30/H3/K Multifunctional Scales WPW 30/F1/K Multifunctional Scales WPW 30/C2/K Multifunctional Scales WPW 3/H1/K Multifunctional Scales WPW 150/H6/K Multifunctional Scales WPW 150/H5/K Multifunctional Scales WPW 150/H4/K Multifunctional Scales WPW 150/H3/K Multifunctional Scales WPW 150/C3/K Multifunctional Scales WPW 150/C2/K Multifunctional Scales WPW 15/H3/K Multifunctional Scales WPW 15/H2/K Multifunctional Scales WPW 15/F1/K Multifunctional Scales