RADWAG WPW 60/H5/K Multifunctional Scales - Manual (Page 118)

In case if:
• The
parameter <P7.4.3 INGRED . CONF.> is set to YES (manual
confirmation) the <CONFIRM INGREDIENT> message is
displayed in the bottom line. Confirm it with .
• The
parameter <P7.4.2 TARRING> is set to MANUAL the:
<CONFIRM TARRING> message is displayed in the bottom line.
Confirm tarring by pressing .
7. After the last ingredient you will see the <RECIPE END> and then
it returns to displaying the recipe name.
In case if:
• The
parameter <P8.2.5 P1 CHUTE> prescribes an output
number. After the dosing procedure is completed you will see the
<PLATF. 1 CHUTE> message (it starts the chute of platform 1)
is displayed and the system is waiting for the mass lower than
the preset LO threshold. The chute will be closed after the time
from <P7.4.5 CHUTE TIME> is counted down (see ch. 25.5.
of manual).
Process stopping:
Users can stop the process of dosing/filling press . It is signalled by
continuous displaying of . You will see <RECIPE STOP> for one
second and then the program returns to displaying the recipe name.
Process holding up:
Users can hold up the process by pressing or . It is signalled by
blinking of the bottom line. Press to continue the process. When you
press you stop the process.
Return to weighing:
See 11.3.
- 118 -