4 self-testing crd5376, 1 noise test, Crd5376 – Cirrus Logic CRD5376 User Manual
Page 9
Advertising
![background image](/manuals/466193/9/background.png)
CRD5376
DS612RD2
9
1.4
Self-Testing CRD5376
Noise and distortion self-tests can be performed once hardware and software setup is complete.
First, initialize the CRD5376 reference design:
• Launch the evaluation software and apply power to CRD5376.
• Click ‘OK’ on the About panel to get to the Setup panel.
• On the Setup panel, select Open Target on the USB Port sub-panel.
• When connected, the Board Name and MCU code version will be displayed.
1.4.1
Noise Test
Noise performance of the measurement channel can be tested as follows:
• Set the controls on the Setup panel to match the picture:
Advertising