Quick-start guide, Figure 1. quick-start guide, Figure 1.quick-start guide – Cirrus Logic CRD42L52 User Manual
Page 6
6
DS680RD1
CRD42L52
2. QUICK-START GUIDE
The following figure is supplied for user convenience as a simplified quick-start guide. Refer to
and
for details on how the various components on the board interface with each other in the
different configuration modes. Refer to
for descriptions on control settings in the Cirrus FlexGUI
software.
Figure 1. Quick-Start Guide
Place 3 AAA batteries with correct polarity on clips BT1,
BT2 and BT3 behind the board or perform step 5 ii.
Set switch to
desired setting.
Connect Power supply
between 1.6 V to 5 V.
Connect either
S/PDIF optical
or BNC cables
for providing
digital input.
Connect
either S/PDIF
optical or
BNC cables
for receiving
digital output.
Connect USB
cable for
communication
between on-board
microntroller and
PC. Once
connected,
configure board
using the FlexGUI
software package
provided.
2
3
5 i
5 ii
6
7
Provide stereo analog
line level input on
stereo jack J7.
Monitor stereo
headphone or
differential speaker
outputs.
1
Attach CRD42L52
to driver board.
4
8
*Boards are
not drawn
to scale