Cirrus Logic CDB48500-USB - Manual (Page 30)

8
4.2.5 Headphone Output
The CDB48500 is designed with one Stereo Headphone output. The content of the Headphone output is
controlled by the Remap tab in the System Block module. The left right headphone channels match the setttings
for DAO-DATA1Left and Right controls on the Remap tab as shown in
Fig. 4-9 .
Figure 4-9. Remap Tab
4.2.6 S/PDIF Transmitter
The CDB48500 is designed with one S/PDIF Transmitter output. The content of the S/PDIF Transmitter output
is controlled by the Remap tab in the System module. The 6/SPDIF L is used to select the channel that will be
output on the left channel and 7/SPDIF R is used to select the channel that will be output on the right channel.
The Remap tab is shown in
Fig. 4-9 .