Cirrus Logic CRD48L10 - Manual (Page 11)

2
2.2 Audio Outputs
2.2 Audio Outputs
2.2.1 Analog Line-level Outputs
• Connector Type: 1/8 inch (3.5mm) stereo Female
• Full Scale Output: 2.9 Vpp
• Reference Designators: J3 (LINE OUT)
2.2.2 Headphone Output
• Connector Type: 1/8 inch (3.5mm) stereo Female
• Full Scale Output: 1.5 Vpp
• Power: 2 x 17 mW (at THD+N = –60 dB)
• Minimum Load: 16 ohms
• Reference Designator: J5 (HEADPHONE)
Note: This output has the same data as J3 (LINE OUT).
2.2.3 Ear Speaker Output
• Connector Type: 100-MIL Male Header (2x1)
• Full Scale Differential Output: 2.3 Vpp (Digital Volume = –2.5 dB)
• Power: 0.51 W (at THD+N = –60 dB)
• Minimum Load: 16 ohms
• Reference Designator: J10 (EAR)
2.2.4 Speakerphone Left Output
• Connector Type: 100-MIL Male Header (2x1)
• Full Scale Differential Output: 5.8 Vpp (Digital Volume = –5.5 dB)
• Power: 0.53 W (at THD+N = –62 dB)
• Minimum Load: 8 ohms
• Reference Designator: J11 (SPKR-L)
2.2.5 Speakerphone Right Output
• Connector Type: 100-MIL Male Header (2x1)
• Full Scale Differential Output: 7.2 Vpp (Digital Volume = –3.5 dB)
• Power: 1.0 W (at THD+N = –74 dB)
• Minimum Load: 4 ohms
• Reference Designator: J12 (SPKR-R)
2.2.6 I 2 S Digital Output
• Connector Type: 100-MIL Male Header (6x2)
• Maximum Signal Level: +V_PROBE
• Reference Designators: TP3 (DSP), TP14 (VSP)