Cirrus Logic CRD48L10 - Manual (Page 14)

5
2.9 MCU DEBUG C-2 Programming Header
2.9 MCU DEBUG C-2 Programming Header
This header is used to program the MCU from a CDB-MCU-DEBUG dongle (P4/C2-OUT connector) OR the Silicon Labs
programming dongle.
• Connector Type: Shrouded 100-MIL Male Header (5x2)
• Absolute Maximum Input Signal Level: +3.6 V
• Absolute Minimum Input Signal Level: –0.5 V
• Maximum Signal Output Level: +1.8 V
• Reference Designators: JP4
2.10 Current Measurement Points
• Connector Type: 100-MIL Male Header (1x2)
• Reference Designators: TP20–TP23, P16