Cirrus Logic CRD48L10 - Manual (Page 29)

1
Chapter 5
Using DSP Composer ™ with CRD48L10-4in4out
The CRD48L10-4in4out can be controlled using the DSP Composer ™ application through the CDB-MCU-DEBUG board.
A detailed description of how to connect to the PC and configure the CDB-MCU-DEBUG for use with DSP Composer can
be found in the CDB-MCU-DEBUG Controller User's Manual.
The CDB-MCU-DEBUG must be connected to JP2 as shown in Fig. 5-1 .
Figure 5-1. CDB-MCU-DEBUG Connected to JP2 of CRD48L10-4in4out
The CRD48L10-4in4out has three .cpa starter projects:
• An analog pass-thru project is shown in Fig. 5-2 .
Figure 5-2. Analog Pass-thru
• An S/PDIF-only pass-thru project is shown in Fig. 5-3 .