MSI 880G-E45 - Manual (Page 29)

2-13
MS-7576
Chapter 2
Serial ATA Connector: SATA1~5
This connector is a high-speed Serial ATA interface port. Each connector can connect
to one Serial ATA device.
* The MB layout in this figure is for reference only.
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may
occur during transmission.
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is opened,
the chassis intrusion mechanism will be activated. The system will record this status
and show a warning message on the screen. To clear the warning, you must enter the
BIOS utility and clear the record.
1.CIN
TRU
2.Gro
und
CD-In Connector: JCD1
This connector is provided for external audio input.
4.R
3.Gro
und
2.Gro
und
1.L