MSI 880G-E45 - Manual (Page 61)

3-21
MS-7576
Chapter 3
Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency. Read-only.
Adjust CPU-NB Ratio
This item is used to adjust CPU-NB ratio.
Adjusted CPU-NB Frequency (MHz)
It shows the adjusted CPU-NB frequency. Read-only.
EC Firmware
This item allows you to select the EC Firmware for Advanced Clock Calibration. For
unlocking the additional cores, you could set it [Special] and then set Advanced Clock
Calibration [Auto] in order to be able to activate the processor cores.
Advanced Clock Calibration
This item is for overclock. Setting to [Enabled] allows you to set the CPU Ratio higher.
It is available only when the processor supports this function.
Auto OverClock Technology
Setting this item to [Max FSB] allows the system to detect the maximum FSB clock and
to overclock automatically. If overclocking fails to run, you can try the lower FSB
clock for overclocking successfully.
MultiStep OC Booster
This item is used to avoid the BIOS might crash with overclocking.
Disabled Disable this item, apply OC settings during POST.
Mode 1 Slight OC during POST and then apply full OC when loading the OS
Mode 2 Load the OS then apply the OC settings.
Memory-Z
Press <Enter> to enter the sub-menu and the following screen appears.
DIMM1~4 Memory SPD Information
Press <Enter> to enter the sub-menu and the following screen appears. This sub-
menu displays the information of installed memory.
▶
▶
▶
▶
▶
▶
▶
▶
▶