MSI Wind Board D510 - Manual (Page 16)

En-6
MS-7618 Mainboard MS-7618 Mainboard
▍
Installing Memory Modules Installing Memory Modules
The memory module has only one notch on the center and will only fi t in the right
orientation.
Insert the memory module vertically into the DIMM slot. Then push it in until the
golden fi nger on the memory module is deeply inserted in the DIMM slot. The plastic
clip at each side of the DIMM slot will automatically close when the memory module
is properly seated.
Manually check if the memory module has been locked in place by the DIMM slot
clips at the sides.
Notch
Volt
Important Important
You can barely see the golden fi nger if the memory module is properly inserted in the
DIMM slot.
1.
2.
3.