Important – MSI Wind Board D510 User Manual

Page 33

Advertising
background image

En-23

English

tRCD

tRCD

When DRAM is refreshed, both rows and columns are addressed separately. This

setup item allows you to determine the timing of the transition from RAS (row ad-

dress strobe) to CAS (column address strobe). The less the clock cycles, the faster

the DRAM performance.

tRP

tRP

This setting controls the number of cycles for Row Address Strobe (RAS) to be

allowed to precharge. If insuffi cient time is allowed for the RAS to accumulate its

charge before DRAM refresh, refresh may be incomplete and DRAM may fail to

retain data. This item applies only when synchronous DRAM is installed in the sys-

tem.

tRAS

tRAS

This setting determines the time RAS takes to read from and write to memory cell.

Auto Disable DRAM/PCI Frequency

Auto Disable DRAM/PCI Frequency

When set to [Enabled], the system will remove (turn off ) clocks from empty DIMM/ PCI

slots to minimize the electromagnetic interference (EMI).

CPU VTT (V)/ DRAM Voltage (V)/ CPU NB (V)/ SB 1.50 (V)

CPU VTT (V)/ DRAM Voltage (V)/ CPU NB (V)/ SB 1.50 (V)

These items are used to adjust the voltage of CPU, DRAM, CPU NB and SB.

Spread Spectrum

Spread Spectrum

When the mainboard’s clock generator pulses, the extreme values (spikes) of the pulses

create EMI (Electromagnetic Interference). The Spread Spectrum function reduces the

EMI generated by modulating the pulses so that the spikes of the pulses are reduced

to fl atter curves.

Important

Important

If you do not have any EMI problem, leave the setting at [Disabled] for optimal system

stability and performance. But if you are plagued by EMI, select the value of Spread

Spectrum for EMI reduction.
The greater the Spread Spectrum value is, the greater the EMI is reduced, and the

system will become less stable. For the most suitable Spread Spectrum value, please

consult your local EMI regulation.
Remember to disable Spread Spectrum if you are overclocking because even a slight

jitter can introduce a temporary boost in clock speed which may just cause your over-

clocked processor to lock up.

Advertising