MSI Wind Board D510 - Manual (Page 19)

En-9
English
C
ONNECTORS
C
ONNECTORS
Serial ATA Connector: SATA1~2 Serial ATA Connector: SATA1~2
This connector is a high-speed Serial ATA interface port. Each connector can connect
to one Serial ATA device.
Floppy D MSI Floppy D MSIFloppy D
MSI Floppy D MSI
Kdkl kdkf k kkfdkkl ddfkkksd dfddf asdka df - d dfdd addfdfddd ddfadf adkjasjdk dfdfasd ddffasdfd ddddd dfdasfdas asdf asd asd asdddddddfa s
asdfsdffsd f adfffasdf ffdf
Kdkl kdkf k kkfdkkl ddfkkksd dfddf asdka df - d dfdd addfdfddd ddfadf adkjasjdk dfdfasd ddffasdfd ddddd dfdasfdas asdf asd asd asdddddddfa s
asdfsdffsd f adfffasdf ffdf
Floppy D MSI Floppy D MSI
Kdkl kdkf k kkfdkkl ddfkkksd dfddf asdka df - d dfdd addfdfddd ddfadf adkjasjdk dfdfasd ddffasdfd ddddd dfdasfdas asdf asd asd asdddddddfa s asdfsdffs df adfffasdff fdf
Kdkl kdkf k kkfdkkl ddfkkksd dfddf asdka df - d dfdd addfdfddd ddfadf adkjasjdk dfdfasd ddffasdfd ddddd dfdasfdas asdf asd asd asdddddddfa s asdfsdffs df adfffasdff fdf
Important Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may
occur during transmission.
Chassis Intrusion Connector: JCI1 Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is opened,
the chassis intrusion mechanism will be activated. The system will record this status
and show a warning message on the screen. To clear the warning, you must enter the
BIOS utility and clear the record.
1.C
INT
RU
2.G
roun
d