MSI Wind Board D510 - Manual (Page 24)

En-14
MS-7618 Mainboard MS-7618 Mainboard
▍
J
UMPERS
J
UMPERS
Clear CMOS Jumper: JBAT1 Clear CMOS Jumper: JBAT1
There is a CMOS RAM onboard that has a power supply from an external battery to keep
the data of system confi guration. With the CMOS RAM, the system can automatically
boot OS every time it is turned on. If you want to clear the system confi guration, set the
jumper to clear data.
JBAT1 JBAT1 Keep Data Clear Data
1 1 1
Important Important
You can clear CMOS by shorting 2-3 pin while the system is off . Then return to 1-
2 pin position. Avoid clearing the CMOS while the system is on; it will damage the
mainboard.