Actiontec electronic NS100-160 - Manual (Page 13)

10
Actiontec Network Attached Storage Device User Manual
11
Chapter 2 Configuring the NAS Device
☞
Note: If the USB device is not removed, it will not be re-con-
nected. The USB device must be removed and re-inserted to re-
connect.
Adding a Print Server
If a USB printer is connected to the NAS Device, the Device can be used as a print
server. To do this, follow these instructions (this installation is for Windows XP
only ; other operating systems may have a slightly different procedure):
1. Plug a USB printer in the USB port on the rear panel of the NAS Device.
2. From the desktop of the computer, select Start, then Printers.