Actiontec electronic NS100-160 - Manual (Page 19)

16
Actiontec Network Attached Storage Device User Manual
17
Chapter 3 Using the Administrative Utility
4. To access the Administration interface, click Administration on the right. A
password prompt appears, as shown below.
5. Enter “admin” for the name, and leave the password blank.
• To gain access, enter the user name and password of a user in the
“Administrators” User Group.
• By default, the only user in the “Administrators” User Group is “admin.”
(Other users can be added later.)
• The default password for the “admin” user is blank (no password).
This should be changed. Click User Password on the NAS Device home
screen to change the password.
6. The “Users” screen appears, as described in the following section.
Use the menu tabs to select the other screens as desired.
Users
This is the first screen that appears after selecting “Administration.” This screen
allows the user to manage other users created on the
NAS Device.
• The “guest” and “admin” users are pre-defined, and cannot be deleted.
• Users can be members of many user groups.