Actiontec electronic NS100-160 User Manual
Page 28
24
Actiontec Network Attached Storage Device User Manual
25
Chapter 3 Using the Administrative Utility
Shutdown/Restart
Use these two sets of text boxes to force the
NAS
Device to turn off and on at the
same time every day, or on the weekends.
Shutdown Now
Clicking this button causes the
NAS
Device to shut down immediately, breaking all
existing network connections. No data will be saved.
Restart Now
Clicking this button restarts the
NAS
Device, breaking all network connections. No
data will be saved. After restarting, it may take a few minutes before the Device is
available on the network.
View Log
Click this button to view the log file in separate window. The log file is a record of
activity on the
NAS
Device, which can help in management and troubleshooting.
Enable NTP (Network Time Protocol)
If enabled, the
NAS
Device will synchronize its clock with a
NTP
(Network Time
Protocol) Server.
NTP Server
Enter the domain name or
IP
address of the
NTP
server to be used. The
NTP
server
can be a public server (on the Internet) or a local server (on the local network).
NTP Status
This shows the status of the
NTP
update procedure.
Synchronize…
Select how often the
NAS
Device synchronizes its clock with the specified
NTP
device. The time of the next synchronization can also be set.