Using the administrative utility, Accessing the administrative utility – Actiontec electronic NS100-160 User Manual
Page 18
15
Using the
Administrative Utility
This chapter describes using the
NAS
Device’s Administration Utility. With the
Utility, the administrator can check the
NAS
Device’s status, add or delete users, or
create user groups.
Accessing the Administrative Utility
To establish a connection from a computer to the
NAS
Device:
1. Open a Web browser.
2. In the Address text box, enter “http://” and the
NAS
Device's
IP
address. If
using the default
IP
address, enter:
http://192.168.0.100
☞
Note: If the port number used by the Device has been changed
(on the System screen) from the default (80), specify the correct
port number when connecting.
For example, if the current port is 8080:
http://192.168.0.100:8080
3. Once connected, the following screen is displayed.
3