MSI MS-96D7 - Manual (Page 22)

2-10
Hardware Setup
▍
MS-96D7
Hardware Setup
▍
MS-96D7
c
onnector
Serial ATA Connector: SATA1 ~ SATA6
Ths connector s a hgh-speed Seral ATA nterface port. Each connector can
connect to one Seral ATA devce.
Important
Please do not fold the SATA cable into a 90-degree angle. Otherwise, data loss
may occur during transmission.
Fan Power Connector: SYSFAN1/2/3/4
The fan power connectors support system coolng fan wth +12V. When con-
nectng the wre to the connectors, always note that the red wre s the postve
and should be connected to the +12V; the black wre s Ground and should be
connected to GND. If the manboard has a System Hardware Montor chpset
onboard, you must use a specally desgned fan wth speed sensor to take ad-
vantage of the CPU fan control.
Important
Please refer to the recommended CPU fans at processor’s official website or
consult the vendors for proper CPU cooling fan.
PIN SIGNAL
1
2
3
4 GND
+12V
Sensor
Control
4 1
SYSFAN1
4
1
SYSFAN2/3/4