MSI MS-96D7 - Manual (Page 26)

2-14
Hardware Setup
▍
MS-96D7
Hardware Setup
▍
MS-96D7
Chassis Intrusion Switch Connector: JCI1
Ths connector connects to the chasss ntruson swtch cable. If the chasss s
opened, the chasss ntruson mechansm wll be actvated. The system wll re-
cord ths status and show a warnng message on the screen. To clear the warn-
ng, you must enter the BIOS utlty and clear the record.
CINTRU GND
IPMB Connector: JIPMB1
Ths connector s used to connect the IPMB (Intellgent Platform Management
Bus) SMBus.
PIN SIGNAL
1
2
3 SMB_IPMB_5VSB_DAT
GND
SMB_IPMB_5VSB_CLK
1