MSI MS-96D7 - Manual (Page 28)

2-16
Hardware Setup
▍
MS-96D7
Hardware Setup
▍
MS-96D7
J
uMper
Clear CMOS Jumper: JBAT1
There s a CMOS RAM onboard that has a power supply from an external battery
to keep the data of system configuration. With the CMOS RAM, the system can
automatcally boot OS every tme t s turned on. If you want to clear the system
configuration, set the jumper to clear data.
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to
1-2 pin position. Avoid clearing the CMOS while the system is on; it will damage
the mainboard.
1
Clear Data Keep Data
1
JBAT1
1
Fan Control Jumper: J1, J2, J3, J7
This jumper specifies the pin numbers of the system fans.
1
4 pn fan
speed control
1
J2, J7
1
3 pn fan
speed control
1 1
J1, J3
1
4 pn fan
speed control
3 pn fan
speed control