Norgren PRA/882000/M IVAC Cleanline cylinder - Manual (Page 3)

PRA/882000/M
N/us 1.5.260.03 4/13
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren, Inc. 2013
One of the advantages of the IVAC cylinders is to use the output cylinder
ports (2 & 4) from the main valve to operate an additional cylinder.
7 Air supply
8 Electrical connection
9 Output ports (2&4)
1 Fieldbus cable
2 IO module
3 Y cable
4 Plug with molded cable, 90°
5 Plug with molded cable, straight
6 Air supply
7
9
8
1
2
4
5 6
3
Reduced Installation Time & Cost
To connect the IVAC simply run a single supply line to provide an air supply to each unit. There is no mounting
of valve islands to the machine framework or inside a cabinet and there is no pipework to run around the
machine to connect each valve to each actuator.