Norgren KIP 1 Series - Manual (Page 2)

7-7
KIP Numbering System
7
KIP Part Identification Numbering (PIN) System For Valves
The KIP part number provides information about every aspect of the product it represents. The first letter is an optional prefix which identifies
UL recognized, oxygen or low wattage. The following numbers identify series, ports, housing style, material, valve function, orifice, seal, coil
construction and coil temperature, in that order. The numerical value for each respective category represents one of multiple options. Where
possible, the organization of this KIP catalog presents information in the order of the part identification number. You may use the number as a
guide to finding information within the catalog.
The following chart is the key to understanding the KIP Part Identification Number.
PREFIXES
(Optional)
U = UL Recognized
Y = Oxygen Service
A = Low Wattage*
- 1.5 Watt
B = Low Wattage*
-2.0 Watt
C = Low Wattage*
-2.5 Watt
D = Low Wattage*
-3.0 Watt
G = Diaphragm
see page 21-23
for ordering
SERIES
1 = Series 1
2 = Series 2
3 = Series 3
6 = Series 6
PORT
3 = 1/8" NPT Male Bottom (a)
4 = 1/8" NPTF
5 = 1/4" NPTF (b)
6 = Manifold Mount (c)
7 = #10-32 UNF
8 = 3/8" NPT (f)
HOUSING
1 = Grommet
2 = 1/2" NPT Conduit
3 = Yoke (d)
4 = Yoke w/bracket (d)
7 = Grommet w/bracket
9 = Slotted (e)
0 = Slotted w/bracket (e)
BODY MATERIAL
0 = Stainless Steel
1 = Brass
3 = Operator
FUNCTION
1 = 2WNC
2 = 2WNO
3 = 3WNCFV
4 = 3WNCLC
5 = 3WNO
6 = 3WMP
7 = 3WDC (a)
ORIFICE
0 = 1/32"
1 = 3/64"
2 = 1/16"
3 = 5/64"
4 = 3/32"
5 = 1/8"
6 = 5/32"
7 = 3/16" (b)
8 = 1/4" (b)
9 = 3/8" (f)
COIL OPTIONS
See page 7-6
VOLTAGE
See page 7-6
SEAL
01 = Buna
02 = Fluorocarbon
®
03 = Neoprene ®
05 = Low temperature Buna
06 = Polyurethane (2WNC only)
08 = Teflon
® (2WNC only)
12 = Neoprene W ®
13 = Ethylene Propylene (EPR
(Food Grade)
(a) = Available in Series 1, 2 & 3.
(b) = Available in Series 3 & 6.
(c) = Available in Series 1, 2 & 6.
(d) = Available in Series 2 & 3 only and must be used
with molded spade coil or free standing molded coil
with lead wires.
(e) = Slotted housing (used with 31 & 51 spade coil
option), available in Series 2, 3 & 6. Used with
molded coil 61 in Series 2 & 3, and 41 in Series 1.
(f) = Available in Series 6, 2WNC only.
(g) = Available in Series 1 & 2 diaphragm only.
U 2 4 0 1 1 5 - 0 2 5 1 - 24VDC
OPTIONAL
® Teflon and Neoprene are registered trademarks of E.I. Dupont De Nemours Co.
*Available in Series 1, 2 & 3 for 2-Way Normally Closed, 3-Way Normally Closed and 3-Way Multi-Purpose functions.