Norgren SNP01012 - Manual

.70 (17.8)
NOTE 1 .39 (10.0)
.30 (7.6)
NOTE 2
NOTE 3
NOTE 4
NOTE 5
.3.15 (80)
1.75 (44.4)
.35 (8.9)
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren Automation Solutions, LLC 2013
002 24589 00325SP 12/4/12
Nut Sensor
SNP01012
Features
Abrasion and impact resistant.
For light duty applications with sensor
tip radial loads up to 35 lbs.
Exceptional for thread detection and
thread quality detection.
Immune to weld fields and resistant to
weld slag.
Minimum nut thickness is:
8.0mm (.31") for M10 nut
10.0mm (.39") for M12 nut
Maximum blank thickness
is 2.5mm (.10")
Note 1 M8 X 1.0
Note 2 2X M8 JAM NUTS
Note 3 SOLD SEPERATELY
Note 4 SOLD SEPERATELY
Note 5 SENSING AREA
Sensor Monitor Cable Weight
SNP01012 SMR36010 (NPN) SCE13000 2m (6ft) .037 lbs / 17 gm
SMR37010 (PNP) SCE13001 2m (6ft) (Angled)
M10 Nut Detector System
Sensor connector:
3-pin (male) 8mm (pico) connector Operating temperature range:
32°F to 212°F (0°C to 100°C) Target material:
Ferrous/Non-Ferrous
Technical Data
Sensor Monitor Cable Weight
SNP01012 SMR36012 (NPN) SCE13000 2m (6ft) .037 lbs / 17 gm
SMR37012 (PNP) SCE13001 2m (6ft) (Angled)
M12 Nut Detector System
SEE ENGINEERING ADVANTAGE
Scan with a QR code reader – www.norgren.com/automationsolutions
Tel: 734-429-4989
Dimensions in. (mm)