Norgren SNP50608 - Manual

NOTE 1
NOTE 2
NOTE 3
NOTE 4
NOTE 5
.35 (8.9)
.40 (10.2)
.25 (6.4)
.16 (4.0)
.10 (2.5)
2.70 (68.6)
1.75 (44.4)
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren Automation Solutions, LLC 2013
001 24251 00292SP 12/4/12
Nut Sensor
SNP50608
Features
Abrasion and impact resistant.
For light duty applications with sensor
tip radial loads up to 30 lbs.
Exceptional for thread detection and
thread quality detection.
Immune to weld fields and resistant to
weld slag.
Minimum nut thickness is;
4.0mm (.16") for M5 nut
5.0mm (.20") for M6 nut
6.5mm (.26") for M8 nut
Maximum blank thickness
is 1.6mm (.06")
Note 1 M8 X 1.0
Note 2 2X M8 JAM NUTS
Note 3 SOLD SEPERATELY
Note 4 SOLD SEPERATELY
Note 5 SENSING AREA
Sensor Monitor Cable Weight
SNP50608 SMR36005 (NPN) SCE13000 2m (6ft) .029 lbs / 13 gm
SMR37005 (PNP) SCE13001 2m (6ft) (Angled)
M5 Nut Detector System
Sensor connector:
3-pin (male) 8mm (pico) connector Operating temperature range:
32°F to 212°F (0°C to 100°C) Target material:
Ferrous/Non-Ferrous
Technical Data
Sensor Monitor Cable Weight
SNP50608 SMR36006 (NPN) SCE13000 2m (6ft) .029 lbs / 13 gm
SMR37006 (PNP) SCE13001 2m (6ft) (Angled)
M6 Nut Detector System
Sensor Monitor Cable Weight
SNP50608 SMR36008 (NPN) SCE13000 2m (6ft) .029 lbs / 13 gm
SMR37008 (PNP) SCE13001 2m (6ft) (Angled)
M8 Nut Detector System
SEE ENGINEERING ADVANTAGE
Scan with a QR code reader – www.norgren.com/automationsolutions
Tel: 734-429-4989
Dimensions in. (mm)