Norgren SNS04 User Manual
Toughened nut sensor sns04, Features, M4 nut detector system
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren Automation Solutions, LLC 2013
REL 25962 13821SP 12/4/12
Toughened Nut Sensor
SNS04
Features
For heavy duty applications with
sensor tip radial loads up to 32 lbs.
For use in weld applications
Immune to weld fields
Resistant to weld slag
Can be used to detect thread
presence
Minimum nut thickness is 4.0 mm (.16")
Maximum blank thickness is
1.6mm (.06")
Note 1
2X M8X 1.0
Note 2
2X M8 X 1.0 JAM NUTS
Note 3
SOLD SEPERATELY
Note 4
SOLD SEPERATELY
Note 5
SENSING AREA
Sensor
Monitor
Cable
Weight
SNS04
SMH36004 (NPN)
SCE13000 2m (6ft)
.019 lbs / 9 gm
SMH37004 (PNP)
SCE13001 2m (6ft) (Angled)
M4 Nut Detector System
Sensor connector:
3-pin (male) 8mm (pico) connector
Operating temperature range:
32°F to 212°F (0°C to 100°C)
Target material:
Ferrous/Non-Ferrous
Technical Data
.12 (3)
2.70 (68.6)
2.15 (54.6)
1.85 (47)
2X .02 (0.5)
.23 (5.8)
NOTE 5
.11 (2.8)
NOTE 1
NOTE 2
NOTE 4
NOTE 3
SEE ENGINEERING ADVANTAGE
Scan with a QR code reader – www.norgren.com/automationsolutions
Tel: 734-429-4989
Dimensions in. (mm)