Norgren SNS08 User Manual
Toughened nut sensor sns08, Features, M8 nut detector system
2.70 (68.6)
2X .04 (1)
.30 (7.6)
NOTE 5
.25 (6.2)
1.85 (47)
.26 (6.6)
NOTE 1
NOTE 2
NOTE 3
NOTE 4
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren Automation Solutions, LLC 2013
001 25962 13299SP 12/4/12
Toughened Nut Sensor
SNS08
Features
For heavy duty applications with
sensor tip radial loads up to 38 lbs.
For use in weld applications
Immune to weld fields
Resistant to weld slag
Can be used to detect thread presence
Minimum nut thickness is 6.5mm (.26")
for M8 nut
Maximum blank thickness is 1.6mm
(.06")
Note 1
2X M8X 1.0
Note 2
2X M8 JAM NUTS
Note 3
SOLD SEPERATELY
Note 4
SOLD SEPERATELY
Note 5
SENSING AREA
Sensor
Monitor
Cable
Weight
SNS08
SMH36008 (NPN)
SCE13000 2m (6ft)
.033 lbs / 15 gm
SMH37008 (PNP)
SCE13001 2m (6ft) (Angled)
M8 Nut Detector System
Sensor connector:
3-pin (male) 8mm (pico) connector
Operating temperature range:
32°F to 212°F (0°C to 100°C)
Target material:
Ferrous/Non-Ferrous
Technical Data
SEE ENGINEERING ADVANTAGE
Scan with a QR code reader – www.norgren.com/automationsolutions
Tel: 734-429-4989
Dimensions in. (mm)