Norgren Lubricators - Manual (Page 23)

10-076 Lubricators
ALE-14-19
All Dimensions in Inches (mm)
Littleton, CO USA Phone 303-794-2611 Fax 303-795-9487
Technical Data
Fluid: Compressed air
Maximum pressure: 250 psig (17 bar)
Operating temperature*: 0° to 175°F (-20° to 80°C)
* Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C).
Start point (minimum flow required for lubricator operation) at 90 psig (6.3 bar)
inlet pressure: 240 scfm (123 dm 3 /s)
Typical flow with 90 psig (6.3 bar) inlet pressure and 5 psig (0.35 bar) pressure
drop: 1300 scfm (614 dm 3 /s)
Nominal reservoir sizes:
2 U.S. gallon (8 liter)
5 U.S. gallon (20 liter)
Recommended lubricants: See Section ALE-29.
Materials
Body and adapter: Aluminum
Reservoir: Steel
Reservoir liquid level indicator lens: Pyrex
Sight-feed dome
Standard: Transparent nylon
Optional: Pyrex and aluminum
Elastomers: Nitrile
16
12
8
4
0
INLET PRESSURE
bar
240
200
160
120
80
40
0
psig
0 200 400 600 800 1000 dm 3 /s
AIR FLOW
0 400 800 1200 1600 2000 scfm
OPERATING RANGE
A B
A: Minimum flow based on oil drip rate of 5 drops per minute.
B: Maximum flow based on pressure drop of 5 psid (0.35 bar).
Oil: SAE 10
Oil Feed Setting: Maximum
Typical Performance Characteristics
Reservoir A B C D
2 gallon (8 liter) 7.81 (198) 7.18 (182) 21.53 (547) 35 (887)
5 gallon (20 liter) 11.81 (300) 11.18 (284) 24.78 (629) 40 (1014)
C
5.13 (130)
2.31 (59)
2 and 5 gallon (8 and 20 liter) reservoir
** Optional pyrex sight-feed dome.
† Minimum clearance required to remove bowl.
D
†
A
B
3.15 (80)**
Reservoir sight glass kits include sight glass, sight glass guards,
seals, and hardware.
Service Kits
Item Type Part Number
Liquid level lens kit 8 and 20 liter reservoir 2274-01
Replacement drain Manual petcock 684-01