Norgren R07 Series Datasheets - Manual

See Section ALE-24 for Accessories
Littleton, CO USA Phone 303-794-2611 www.norgren.com
R07
● Compact design
● Full flow gauge ports
● Low torque, non-rising adjusting knob
● Snap action knob locks pressure setting when
pushed in
● Standard relieving models allow reduction of outlet
pressure even when the system is dead-ended
● Can be disassembled without the use of tools or
removal from the air line
Miniature Series 07 General Purpose
Regulator 1/8" and 1/4" Port Sizes
ALE-4-2
ISO Symbols
Relieving Non relieving
Alternative Models
Port Size Substitute
1/8" 1
1/4" 2
Threads Substitute
PTF A
ISO Rc taper B
ISO G parallel G
Port Size Model Number Flow† scfm (dm 3 /s) Weight lbs (kg)
1/8" R07-100-RGKA 14 (6.5) 0.31 (0.19)
1/4" R07-200-RGKA 15 (7) 0.31 (0.19)
Ordering Information. Models listed include PTF threads, relieving diaphragm, 5 to 100 psig (0.3 to 7 bar) outlet pressure adjustment
range*, with gauge.
Outlet Pressure Adjustment Ranges* Substitute
1 to 10 psig (0.1 to 0.7 bar)
A
5 to 50 psig (0.3 to 3.5 bar) E
5 to 100 psig (0.3 to 7 bar) K
5 to 125 psig (0.3 to 8.6 bar) L
Option Substitute
Standard 0
Low flow seat 2
Gauges Substitute
With G
Without N
Diaphragm Substitute
Relieving R
Non relieving N
Option Substitute
Not applicable 0
* Outlet pressure can be adjusted to pressures in excess of, and less
than, those specified. Do not use these units to control pressures
outside of the specified ranges.
† Approximate flow at 100 psig (7 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a droop of 14.5 psig (1 bar) from set.
- ★ ★ ★ ★ ★ ★ - 0 ★ R 7