Norgren 11-044 Series - Manual

Littleton, CO USA Phone 303-794-2611 www.norgren.com
11-044
1
! Non-relieving models.
! Acetal plastic, corrosion resistant construction
! Low torque, non-rising adjusting knob.
! Snap action knob locks pressure setting when
pushed down.
! Designed for use with deionized water and potable
water systems. Plastics and metals in contact with
fluid are approved by the National Sanitation
Foundation (NSF) for use in potable water systems.
Elastomers are food grade.
! Can be disassembled without the use of tools or
removal from the air or water line.
Water and Compressed Air Service
Pressure Regulator 1/4" Tube Connection
ISO Symbols
Non relieving
Ordering Information.
Models listed include non-relieving diaphragm, and 5 to 100 psig (0.3 to 7 bar) outlet pressure adjustment range † .
Port Connection Model Flow * scfm (dm 3 /s) Flow ** U.S. gpm (lpm) Weight lb (kg)
1/4" tube nut and ferrule 11-044-003 3.0 (1.4) 0.7 (2.65) 0.16 (0.08)
* Approximate flow with 100 psig (7 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a 15 psig (1 bar) droop from set.
** Approximate flow with 100 psig (7 bar) inlet pressure, 60 psig (4 bar) set pressure and a 15 psig (1 bar) droop from set.
† Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges.
Alternative Models 4 0 - " " " 4 - 1 1
Outlet Pressure Adjustment Range† Substitute
1 to 10 psig (0.1 to 0.7 bar)
001
2 to 50 psig (0.3 to 3.5 bar) 002
5 to 100 psig (0.3 to 7 bar) 003
Contact Norgren for more information
Alternate fitting and port orientations available
Threaded and barbed Threaded Barbed