Norgren R91 Series User Manual

Norgren Hardware

Advertising
background image

See Section ALE-24 for Accessories

ALE-5-6

Littleton, CO USA

Phone 303-794-2611

www.norgren.com

R91

Bonnet and body made from acetal plastic.

R91W designed for use with deionized water and
potable water systems. Plastics and metals in
contact with fluid are approved by the National
Sanitation Foundation (NSF) or the Food And Drug
Administration (FDA) for use in potable water
systems. Elastomers are food grade. Non relieving
models only.

R91G designed for use with non-potable water and
compressed air systems. Non relieving and relieving
models.

Low torque, non-rising adjusting knob.

Snap action knob locks pressure setting when
pushed down.

Can be disassembled without the use of tools or
removal from the air or water line.

Water or Compressed Air Pressure

Regulator 1/4" Port Size

Non Relieving

Relieving

ISO Symbols

R 9 1

-

★ ★

-

Port Size

Substitute

1/4

"

2

Threads

Substitute

PTF

A

ISO Rc taper

B

ISO G parallel

G

Diaphragm

Substitute

Non relieving

N

Relieving ¶

R

Gauge

Substitute

With

G †

Without

N

Application

Substitute

Industrial air, non-potable water

G

Potable water, deionized water

W

Adjustment

Substitute

Knob

K

Alternative Models

Outlet Pressure Adjustment Range††

Substitute

5 to 50 psig (0.3 to 3.5 bar)

E

5 to 125 psig (0.3 to 8.6 bar)

L

*

Approximate flow with 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a 15 psig (1 bar) droop from set.

**

Approximate flow with 100 psig (7 bar) inlet pressure, 60 psig (4 bar) set pressure and a 15 psig (1 bar) droop from set.

Gauge with NSF approved materials not available.

†† Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges.

Relieving diaphragm only available with the R91G regulator.

Ordering Information.

Models listed include PTF threads, knob adjustment, non relieving diaphragm, 5 to 125 psig (0.3 to 8.6 bar) outlet pressure

adjustment range†, and without gauge.

Inlet Port

Application

Model

Flow* scfm (dm

3

/s)

Flow** gpm (lpm)

Weight lb (kg)

1/4"

Industrial air and

R91G-2AK-NLN

24 (11)

1.75 (6.6)

0.15 (0.07)

non-potable water

1/4"

Potable water and

R91W-2AK-NLN

24 (11)

1.75 (6.6)

0.15 (0.07)

deionized water

Advertising