Norgren Manifold Regulators - Manual (Page 2)

See Section ALE-25 for Accessories
ALE-7-2 Littleton, CO USA Phone 303-794-2611 Fax 303-795-9487
R30M SERIES
● Push-in fittings in ports. No need for threaded
connectors and fittings
● Push to lock adjusting knob with tamper resistant
accessory
● Integral base mounting
● Water or compressed air only
Manifold Regulator
8 mm and 10 mm Port Sizes
ISO Symbols
Relieving Non relieving
Ordering Information. Models listed include 10 mm push-in fittings, knob adjustment, relieving diaphragm, 0 to 70 psig (0 to 4.8 bar) outlet pressure
adjustment range* with gauge, with porting plug.
† Typical flow with 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a 15 psig (1 bar) droop from set.
Port Model Flow † scfm (dm 3 /s) Weight lb (kg)
8 mm R30M-8DK-RGG 17 (8) 0.22 (0.10)
10 mm R30M-ADK-RGG 17 (8) 0.22 (0.10)
0 3 R M - ★ D - ★ K ★ ★
* Outlet pressure can be adjusted to pressures in
excess of, and less than, those specified. Do not
use these units to control pressures outside of the
specified ranges.
Alternative Models
Gauge Substitute
With G
Without N
Port Size Substitute
8 mm 8
10 mm A
Outlet Pressure Adjustment Ranges* Substitute
0 to 70 psig (0 to 4.8 bar) G
5 to 100 psig (0.3 to 7 bar) K
Push-In Form Substitute
Metric D
Type Substitute
Relieving R
Non relieving N
Adjustment Substitute
Knob K