Norgren 5200-75 Series - Manual

Performance
Application Designed to isolate vehicle air systems in case of leakage. Protects the integrity of the air supply.
Material Thermoplastic Body with Fluorosilicone Seals.
Part Number 5200-75
Rated PSI 150 PSIG maximum
Operating Temperature -40°F to 230°F
Equivalent Orifice Cd = .65 equivalent orifice = .07" minimum. The valve shall flow 10 SCFM minimum with 120 PSIG applied
at the inlet and the outlet at ambient air pressure.
Flow Rate 3.3 SCFM minimum with 120 PSIG at the inlet and 110 PSIG at the outlet.
Connectors 1/4" push-to-connect fittings meeting FMVSS 571.106 standards when used with SAE J844 tubing.
Opening Pressure
(On Rising Pressure)
75 PSIG ± 10 PSIG
Closing Pressure
(On Closing Pressure)
60 PSIG ± 5 PSIG
Supply Port 1/4"
Delivery Port 1/4"
Spray Cap Black
Features
Norgren GT Development Inline Pressure
Protection Valve with DOT push- to-connect
fittings designed to isolate vehicle air systems in
case of leakage, protects the integrity of the air
supply.
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren GT Development Corporaton, 2014
Inline Pressure Protection Valve
5200-75
REV: 8/14 01