Norgren FleetFit - Vehicle Push-In Fittings - Manual (Page 8)

FIT-4-8 Littleton, CO USA Phone 303-794-2611 www.norgren.com
FleetFit Vehicle Push-In Fittings
Dimensions in Inches (mm)
Note: Supplied complete with two locknuts. This connector can
also be ordered with one locknut only (to order quote series
94 4508 88 and size).
Male Bulkhead Connectors
Metric, Metric
D
E F
A C
H
G
B
A
Tube B Panel C G H
O.D. Thread Hole ø Thread Product D E F A/F A/F
3⁄8" M16 x 1.5
0.65
M20 x 1.5 94 4642 05
1.95 1.20 0.39 1.06 1.06
(16.5) (49.5) (30.5) (10.0) (27.0) (27.0)
3⁄8" M20 x 1.5
0.8
M20 x 1.5 94 4642 01
2.36 1.38 0.47 1.06 1.06
(20.5) (60.0) (35.0) (12.0) (27.0) (27.0)
1⁄2" M24 x 1.5
0.97
M24 x 1.5 94 4642 04
2.01 1.22 0.39 1.18 1.18
(24.5) (51.0) (31.0) (10.0) (30.0) (30.0)
Male Bulkhead Connectors
BSP Taper, Metric
E F
D
B
A
C
H G
A B
Tube BSP C Panel Product G H
O.D. Taper Thread Hole ø Number D E F A/F A/F
3⁄8" 1⁄2" M20 x 1.5
0.81
94 4652 01
2.11 1.20 0.63 1.06 1.06
(20.5) (53.5) (30.5) (15.9) (27.0) (27.0)
1⁄2" 1⁄2" M24 x 1.5
0.97
94 4652 02
2.13 1.22 0.63 1.06 1.18
(24.5) (54.0) (31.0) (15.9) (27.0) (30.0)
Straight Bulkhead Adapters
UNF / SAE 45° Flare
Additional Bulkhead Nuts
D E
C
B A
F
G
A
Tube B Product F G
O.D. UNF Number C D E A/F A/F
1⁄4" 7⁄16" 94 4602 03
1.99 0.57 1.18 0.67
11⁄16"
(50.5) (14.5) (30.0) (17.0)
3⁄8" 5⁄8" 94 4602 02
2.80 0.71 1.81 0.87
15⁄16"
(71.0) (18.0) (46.0) (22.0)
1⁄2" 3⁄4" 94 4602 01
2.93 0.75 1.81 0.94
1-1⁄8"
(74.5) (19.0) (46.0) (24.0)
Bulkheads include lock nuts. Refer to the numbers
below to order additional nuts.
Thread Part Number A/F
M12 X 1.0 95 0520 01
–
–
M15 X 1.0 95 0520 03
0.87
(22.0)
M20 X 1.5 95 0520 06
1.06
(27.0)
M24 X 1.5 95 0520 07
1.18
(30.0)