Norgren Pneufit C User Manual
Pneufit c composite and pneufit m fittings inch
Pneufit C composite and
Pneufit M fittings
Ø 1/8” ... 1/2” O/D tube
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
For your local Norgren Technical Sales Centre phone 0345 662266. For your local Norgren Distributor phone 0345 227777.
IMI Norgren Limited, PO Box 22, Eastern Avenue, Lichfield, Staffordshire WS13 6SB
Standard sizes: 5/32", 3/16", 1/4", 5/16", 3/8"
Minature sizes: 1/8", 5/32”
from Dec 2003)
Standard sizes: 10-32 UNF, 1/8", 1/4", 3/8" and
1/2" NPT and ISO R
Minature sizes: 10-32 UNF, 1/16" and 1/8" NPT
Nylon 11 or 12
Polyurethane 85 or 95 durometer
C fittings are ready to use, offering fast
assembly with no need for tools providing optimum flow.
C offers a broad range of over 1,000 composite push-
in pneumatic fittings to complement our established all brass
Releasable stainless-steel grab-ring to grip nylon or
polyurethane tube (85 or 95 durometer).
Nickel plated brass components provide corrosion and
contamination resistance and an extended life.
Pre applied thread sealant on all taper threads and recessed
captive O-ring on parallel threads provides optimum rapid
Internal and external hexagons on straight fittings.
Immediate quality sealing using silicone free U-packing.
Mounting holes on all union fittings.
Also introducing Miniature Pneufit M an ultra compact
alternative where space is at a premium.
Medium: Compressed air
Operating pressure: 29.5" Hg vacum up to 150 psi
Temperature: 32°F to 140°F
Seals: NBR (silicone free) u-packaging and O-rings
Threaded bodies: nickel plated brass
Release sleeve and backing ring: POM
Grab-ring: stainless steel
Collar: nickel plated brass
Thread sealant: threebond 2350B