Norgren Tube cutter - Manual (Page 5)

Littleton, CO USA Phone 303-794-2611 www.norgren.com FIT-7-5
Accessories and Replacement Parts
Tube Mount - 10 Channel
● Full 10 channel section (4" long, 5/8" wide and 3/8" high) is
easily cut for 1 to 10 channels.
● Each channel is countersunk for No. 4 machine screws.
● Tubing snaps into channels for clean, organized circuits.
● Pressure sensitive Urethane foam adhesive backing for quick
mounting (except 3/8" model).
● Slotted design allows mounting on curved or angular surfaces.
Color of mounts match machine or tubing.
Mounting
Part Tube Screw
Number Size Size Color
94 902 002 5/32" & 4 mm #4 Black
94 902 003 3/16" #4 Black
94 901 004 1/4" & 6 mm #4 White
94 902 004 1/4" & 6 mm #4 Black
94 903 004 1/4" & 6 mm #4 Blue
94 904 004 1/4" & 6 mm #4 Green
94 905 004 1/4" & 6 mm #4 Red
94 906 004 1/4" & 6 mm #4 Yellow
94 908 004 1/4" & 6 mm #4 Grey
94 902 006 3/8" & 10 mm - Black
Spiral Flex Wrap
● Natural color Polyethylene spiral flex wrap
twists easily over bundles of various sized
tubing or insulated electric wire.
● Nominal 1/2" O.D. accommodates bundles
from 3/8" to 4" in diameter. Can be wrapped
for greater flexibility or butted for rigidity.
● Tubing or wire can be led out at any point.
● Provided in 50’ (15 meter) coils.
● Order part number 94 960 001.
Replacement Parts
48 026 101 Replacement thermoplastic
sealing washer for use with
10-32 and M5 threads.
Sold individually.
48 031 101 Replacement viton bonded
sealing washer for use with
10-32 and M5 threads. Sold in
package of 10.
Release Tool
Used to disconnect tubing from all Norgren
fittings. Helps in situations where fitting is
difficult to reach.
Part Number: 54 0001 00