Norgren 3000 User Manual
Combination valve, Features
Combination Valve Performance
Combination Paddle Seat Valve Performance
Designed to operate air seat systems using an electric air compressor
Push: Closes electrical switch Approved for use with RDH Enterprises # 64-00450 12 VDC compressor
Pull: “OUT” port is vented to atmosphere.
Black with GT logo
Provides pneumatic and electric control of air seats employing an electrically-driven air compressor
3-way, dead center, paddle style actuation
125 psig max.
1/4" Barb connection
All plastic components meet FMVSS 302 flammability requirements
Rated for steady state direct current of 7.5 amps maximum. Zero-current voltage of 16 VDC maximum.
Duty cycle of 25% maximum, and “ON” time of 60 seconds maximum.
Norgren GT Development Combination Valves
have an electrical switch integrated into the valve
body, which is used in conjunction with a 12-volt
air compressor. Actuation of the valve either
engages the compressor, or vents the air springs.
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren GT Development Corporaton, 2014