Norgren Syringe V6 - Manual

Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren Kloehn, Inc. 2013
10/13 PDS-0010 REV. 5
Syringe V6 (6cm) Product Line
Physical
Length (Dispensed)
4.37"; (Aspirated):6.73"
Thread Type
¼-28 UNF-2A
Test Pressure
80 psi
Environmental
Operating Temperature
50°F to 104°F (10°C to 40°C)
Storage Temperature
13°F to 185°F (-25° to 85°C)
Relative Humidity
Up to 100%
Mechanical
Chemical
Standard Syringe Seal
PTFE
Wetted Materials
Borosilicate Glass, PCTFE, PTFE
(or UHMW) (smaller sizes ZDV
tips are PTFE coated 316L)
Syringe Tips
Lubricated with laboratory-
grade Silicone
The V6 syringe line is designed to couple to a
Syringe V6 Pump and standard valve assembly.
These syringes are typically used in various
types of instruments and analyzers serving
clinical, medical, and analytical instrumentation
applications. An array of syringe volumes are
available that can be dispensed and/or aspirated
over a full 6cm stroke.
*Add 1 pound drag force to non-lubricated plunger tip requests.
Syringe Sizes 10ul 25ul 50ul 100ul 250ul 500ul 1.0ml 1.25ml 2.5ml 5.0ml 10ml 25ml 50ml
Orifice Diameter (in) .016 .016 .024 .032 .039 .076 .076 .076 .076 .076 .076 .076 .076
Syringe (End Cap) Diameter (in) 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.6 .75 1.12 1.5
*Max Drag Force (lbs)
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 6.0 6.0 8.0 8.0
7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 10.0 10.0 15.0 15.0
PTFE
UHMW
Standard Syringe Assembly (individually boxed):
Size Orifice Standard Syringe ZDV Port Thread
25ul 0.027 17591 — ¼-28 UNF
50ul 0.024 17592 — ¼-28 UNF
100ul 0.032 17593 — ¼-28 UNF
250ul 0.039 17594 19509 ¼-28 UNF
500ul 0.076 17595 19537 ¼-28 UNF
1.0ml 0.076 17596 25429 ¼-28 UNF
1.25ml 0.076 17597 25431 ¼-28 UNF
2.5ml 0.076 17598 19539 ¼-28 UNF
5.0ml 0.076 17599 18463 ¼-28 UNF
10.0ml 0.076 17600 18469 ¼-28 UNF
25.0ml 0.076 17601 23734 ¼-28 UNF
50.0ml 0.076 17602 — ¼-28 UNF
Syringe construction:
Syringes have Borosilicate glass. The 25ul, 50ul, and 100ul syringes use a standard plunger tip,
while the 250ul through 50ml incorporate a canted spring design.