Norgren V3 Syringe Drive Pump - Manual (Page 2)

Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren Kloehn, Inc. 2012
5/13 PDS-0004 REV. 6
V3 Syringe Drive Pump
Ancillary items:
Communication cable RS485, 6” long; pump to pump (2 units) P/N 17736
Pump to pump stacking kit P/N 23453
Cooling Fan P/N 24287
Mounting Kit P/N 24480
Starter Kit (includes all items listed below) P/N 23427
24VDC Power supply P/N 23429
Adapter (card edge to AMP connectors) P/N 23428
Software; operator’s manual; and application notes. P/N 23422
Communications cable P/N 17734
Software support:
KloehnControl (configuration and debug program)
KSerial (command-line communication utility)
KCom (machine language helper program)
KProbe (communication trouble shooting utility)
Valves - Face:
Configuration P/N - Distribution Non - Distribution Orifice Size
1-WAY (syringe mtg. block) 23272 — .059 (straight through)
3-WAY 23324 23562 .059
4-WAY 23325 23563 .059
5-WAY 23326 — 1 mm
6-WAY 23327 — 1 mm
Valve construction:
Valve wetted surfaces have a PPS (polyphenylene sulfide) body and PEEK (XP113) rotor.
Port connection is 1/4-28 UNF.
All valve ports are accessible when using syringes listed and Kloehn spring-loaded fittings
(recommended) or standard fittings (Upchurch #P200 fittings or equal).
Valve weep hole port connection is #6-40 UNF-2A. Fittings for this port are available in two materials;
PEEK (PT # 24528); and stainless steel 303 (PT # 24529). For use with 1/16 OD tubing.
Valves - Plug:
Configuration P/N - Distribution Non - Distribution Orifice Size
2-WAY 25390 — 0.031
2-WAY 25391 — 0.059
2-WAY 25392 — 0.076
3-WAY 25393 28391 0.031
3-WAY 25394 28393 0.059
3-WAY 25395 28395 0.076
4-WAY 25396 28397 0.031
4-WAY 25397 28399 0.059
4-WAY 25398 28401 0.076
5-WAY 25399 — 0.031
5-WAY 25400 — 1mm
6-WAY 25401 — 0.031
6-WAY 25402 — 1mm
Valve construction:
Valve wetted surfaces have a Kel-F (polychlorotrifluoroethylene) body and Teflon plug.
Port connection is 1/4-28 UNF.
All valve ports are accessible when using syringes listed and Kloehn spring-loaded fittings
(recommended) or standard fittings (Upchurch #P200 fittings or equal).
Valve weep hole port connection is #6-40 UNF-2A. Fittings for this port are available in two materials;
PEEK (PT # 24528); and stainless steel 303 (PT # 24529). For use with 1/16 OD tubing.