Norgren V6 Syringe Drive Pump - Manual

Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren Kloehn, Inc. 2012
4/13 PDS-0005 REV 7
V6 Syringe Drive Pump
Physical
Height
10"
Width
2.55"
Depth
4.75" (face plate to back plate)
4.9" to card edge
Weight
5.14 lbs.
Environmental
Operating Temperature
32°F to 131°F (0°C to 55°C)
Operating Humidity
5 to 95% RH, non-condensing at
131°F (55°C)
Storage Temperature
13°F to 185°F (–25° to 85°C)
WEEE & RoHS compliant
Mechanical
Operation
Any orientation
Mounting Holes
Top and bottom as well as on
the face plate
Resolutions Available
(12000; 24000; and
48000 increments)
Speed
(Max. – 10000 steps/sec.;
min. 60 steps / sec.)
(Default – 5000 steps/sec.)
Syringe Size
25ul to 50ml
Valve Type
2 way to 12 way
Available with no valve; solenoid
valve; or rotary valve
PC board choices:
Base board (sensor array and
motor pin out only - no motor
drivers or control electronics).
Driver board (sensor array and
motor drivers only, no control
electronics).
Driver & Control boards (fully
functional motor drivers and
control electronics).
Card-edge connector
Integrated RS232
Integrated power filter
Multiple valve choices
Including no valve & solenoid valve
Interface
RS-485 or RS-232 communications
Data terminal or OEM protocol
1200 to 38.4K baud, 8 data bits,
1 stop bit, no parity, half duplex
Three inputs, three output ports
Digital voltmeter
Switched and wired device address
Power
Operation
24V (with a maximum power voltage
ripple of 720mv peak-to-peak).
Power Consumption
40 watts, 11 watts idle.
The VersaPump 6 is a programmable precision liquid
metering instrument with non-volatile user program
memory and system input/output (I/O). The V6 is
designed with the flexibility and versatility to meet
a variety of system configurations. It can be used as
a stand alone controller, or integrated into system
configurations. The module is capable of simple closed
loop control of an external quantity or process without
the need of an external controller for direction. Mechanically, the syringe pump is driven via stepper
motor and precision ball screw. It has a 60mm stroke
and is available in three resolutions. The pump can be
coupled with a variety of valves and syringes, as well
as PC board selections, to meet specific needs.
Pump communications are compatible with other
Kloehn devices.
1/10 Stroke Dispenses Full Stroke Dispenses
Precision: 0.10% CV, 0.20% max. 0.007% CV, 0.0092% max.
Accuracy: 0.20% CV, 0.60% max. ——