Revolabs fusion – Revolabs Fusion User Guide User Manual

Page 7

Advertising
background image

Page 7



Recharging — when the YELLOW LED starts to flash intermittently on the
microphone the battery has 30 minutes of charge remaining. To charge the
batteries place microphones into the Revolabs Solo™ Executive Charger Base
and the mic LED's will display a 5 blink "self test". During charging, the LED
indicator will be RED when mics are discharged and turn GREEN when charged.
The microphones are muted while in the Charger Base. In normal use, batteries
should fully charge in about 2 hours, and can be “quick-charged” to 85% capacity
in 45 minutes. Over time (years), batteries gradually wear down and require
longer charging times. This is normal. Always return microphones to the
Charger Base when not in use.


The batteries of microphones left in the Charger Base remain solid GREEN.

Important
: The Lithium Polymer rechargeable batteries that power the microphones
are not user serviceable. Please contact Revolabs (www.revolabs.com) or your AV
service provider for replacement instructions and to assure the proper disposal method
is used.



Warning: Never dispose of batteries in a fire because they may explode.

NOTE: A fully charged battery provides approximately 8
hours of talk time

Revolabs Fusion™

Page 7

Advertising