Revolabs Fusion Setup Guide - Manual (Page 17)

Sony® Installation (Sony G70 shown for example)
This information is meant to be illustrative only. Consult your Sony
Videoconferencing System Administrator Manual for the specific instructions.
NOTE: Requires special adapter cable - XLR Female to 3.5 mm mini connector.
Part number: 07-SONYVC-01
Step 1 Step 2
1. Plug the red RCA connector on one end of Cable C into Sony video-
station <Audio Out 1>, and then plug the red RCA connector on the other
end into the Fusion Base Station <Conf In>.
2. Plug one XLR connector of Cable D, XLR to XLR, into XLR Female to
3.5mm adapter cable and then to the Sony video-station <Mic 1 Input> and
the other XLR connector into the Fusion Base Station Mic Level Output
<Conf Out (Mics)>.
To configure the Sony system:
 Select the Audio settings drop down menu.
Confirm or modify the following settings:
 Input Select - MIC
 MIC Select – MIC
 Echo Canceller - OFF
 CTE – OFF
 Press SAVE to save changes.
Page 17
Revolabs Fusion™