Revolabs Fusion Microphone System — Polycom IP 7000 - Manual (Page 2)

Connecting the Cables
1. Connect a Male RCA-RCA audio cable between the “Conf. In” port on the Fusion
and the left “Audio In” port on the Multi Interface Module.
2. Connect a Male RCA-RCA audio cable between the “Conf. Out” port on the
Fusion and the left “Audio Out” port on the Multi Interface Module.
3. Connect a Male RCA audio cable between the “Room Out” port on the Fusion
and the Speakers.
3
1
NOTE: You must use your Fusion remote control to control the room volume
for both the audio conference calls. Adjusting the volume in the phone will
cause echo.
2
1 2